Motogadget Mo.Unit Blue
Buy Now, Pay Later.
The new mo.unit blue has moved on from the established previous version by undergoing significant development and improvements. It is now equipped with 12 inputs and 10 outputs, replaceable high-quality cable clamps and, most notably, Bluetooth® LE. This enables the mo.unit blue to be connected to our ‘mo.ride’ smartphone App. This feature is unique for motorbike accessories.
The mo.ride App manages the entire setup and alarm system. Fault diagnostics can also be performed during operation and without having to remove the mo.unit. The secure, encrypted Keyless Go function can also be used.
When this function is activated and you approach your motorbike with your smartphone, the on-board electrical system is activated and the motorbike is ready to be started.
The mo.unit blue is the digital control unit for your motorbike – the heart of the entire on-board electrical system. It can be operated using buttons or using conventional handlebar switches. It controls all necessary components on the vehicle while also performing fuse functions.
There are considerably fewer relays and individual components in the wiring harness and the vehicle can be rewired with less effort in a very short amount of time.
When using the mo.button, all switch connections are reduced to one single cable.
FEATURES WITHOUT SMARTPHONE APP.
- Complete digital control using buttons possible with 4 or 5-button operation.
- Complete replacement for the fuse box. 10 independent circuits are digitally monitored and switched off if there are faults. After the fault is rectified, the safety function is automatically reset.
- Integrated alarm system that can be installed in any position.
- Integrated, digital flasher relay that is load-independent; automatic switch-off optional and can be set; mo.wave mode can be selected.
- Integrated hazard warning light.
- Turn signal can optionally be set as a positioning light.
- Integrated parking light and headlight flashing.
- Lo-beam and Hi-beam (up to 200 W switched capacity) can be controlled using only one button.
- Integrated, digital brake light modulator; flashing mode can be programmed.
- Acceleration-controlled emergency brake light (automatic warning signal).
- Integrated starter relay for the starter system with solenoid (up to 30 A switched capacity).
- Intelligent and configurable management/switch-off of power consuming devices so that the maximum starting energy from the battery can be used when starting the motorbike.
- Integrated, digital horn relay.
- Two configurable additional outputs AUX1 and AUX2.
- Diagnostics function for assigning inputs, outputs, the circuit switching status, short circuit diagnostics etc.
- Calibration and current measurement enables faults to be detected on all lamps.
FEATURES WITH SMARTPHONE APP.
- Encrypted connection via Bluetooth® LE (Low Energy) for manipulation protection and lower smartphone and mo.unit blue energy usage.
- Keyless Go (the on-board electrical system is switched on when you approach the motorbike with your smartphone).
- Alarm events are sent via Bluetooth® to the App (with date, time, vehicle on the floor etc.).
- Alarm system mode and sensitivity can be adjusted.
- The on board voltage can be monitored in the App.
- Diagnostics on all inputs and outputs; current, voltage and device temperature measurement.
- Real-time audio fault messages issued via the helmet headset.
- Outputs can be switched manually via smartphone (except for starter).
- Firmware updates provided anywhere via smartphone and App without removal.
- Setup menu can be configured anywhere via smartphone and App without removal.
- Speedometer input for comparing the vehicle mileage with mo.ride can be used for vehicle management with automatic alerts for maintenance tasks, the condition of the tires, chain, brake pads, oil, operating fluids, spark plugs etc.
- Logbook for recording journeys and displaying the vehicle status, alarm events and maintenance tasks.
- Parking position display and Ping! for help locating the vehicle.
- LIN bus connection for connecting to compatible motogadget products at a later date.
|
L/W/H |
90 x 53 x 30 mm, bolt distance 74 mm |
|
Weight |
Approx. 180 g |
|
Fastener |
2 x M5 stainless steel bolts (installation and ground connection), 1 x M5 screwing contact for battery Plus |
|
Operating voltage |
6 V - 20 V |
|
Operating temperature |
-20°... +80°C |
|
Inputs |
1 x input (+12 V switched) for ignition lock or mo.lock |
|
Outputs |
10 x Outputs (+12V) for: |
Motogadget Mo.Unit Blue
Buy Now, Pay Later.
The new mo.unit blue has moved on from the established previous version by undergoing significant development and improvements. It is now equipped with 12 inputs and 10 outputs, replaceable high-quality cable clamps and, most notably, Bluetooth® LE. This enables the mo.unit blue to be connected to our ‘mo.ride’ smartphone App. This feature is unique for motorbike accessories.
The mo.ride App manages the entire setup and alarm system. Fault diagnostics can also be performed during operation and without having to remove the mo.unit. The secure, encrypted Keyless Go function can also be used.
When this function is activated and you approach your motorbike with your smartphone, the on-board electrical system is activated and the motorbike is ready to be started.
The mo.unit blue is the digital control unit for your motorbike – the heart of the entire on-board electrical system. It can be operated using buttons or using conventional handlebar switches. It controls all necessary components on the vehicle while also performing fuse functions.
There are considerably fewer relays and individual components in the wiring harness and the vehicle can be rewired with less effort in a very short amount of time.
When using the mo.button, all switch connections are reduced to one single cable.
FEATURES WITHOUT SMARTPHONE APP.
- Complete digital control using buttons possible with 4 or 5-button operation.
- Complete replacement for the fuse box. 10 independent circuits are digitally monitored and switched off if there are faults. After the fault is rectified, the safety function is automatically reset.
- Integrated alarm system that can be installed in any position.
- Integrated, digital flasher relay that is load-independent; automatic switch-off optional and can be set; mo.wave mode can be selected.
- Integrated hazard warning light.
- Turn signal can optionally be set as a positioning light.
- Integrated parking light and headlight flashing.
- Lo-beam and Hi-beam (up to 200 W switched capacity) can be controlled using only one button.
- Integrated, digital brake light modulator; flashing mode can be programmed.
- Acceleration-controlled emergency brake light (automatic warning signal).
- Integrated starter relay for the starter system with solenoid (up to 30 A switched capacity).
- Intelligent and configurable management/switch-off of power consuming devices so that the maximum starting energy from the battery can be used when starting the motorbike.
- Integrated, digital horn relay.
- Two configurable additional outputs AUX1 and AUX2.
- Diagnostics function for assigning inputs, outputs, the circuit switching status, short circuit diagnostics etc.
- Calibration and current measurement enables faults to be detected on all lamps.
FEATURES WITH SMARTPHONE APP.
- Encrypted connection via Bluetooth® LE (Low Energy) for manipulation protection and lower smartphone and mo.unit blue energy usage.
- Keyless Go (the on-board electrical system is switched on when you approach the motorbike with your smartphone).
- Alarm events are sent via Bluetooth® to the App (with date, time, vehicle on the floor etc.).
- Alarm system mode and sensitivity can be adjusted.
- The on board voltage can be monitored in the App.
- Diagnostics on all inputs and outputs; current, voltage and device temperature measurement.
- Real-time audio fault messages issued via the helmet headset.
- Outputs can be switched manually via smartphone (except for starter).
- Firmware updates provided anywhere via smartphone and App without removal.
- Setup menu can be configured anywhere via smartphone and App without removal.
- Speedometer input for comparing the vehicle mileage with mo.ride can be used for vehicle management with automatic alerts for maintenance tasks, the condition of the tires, chain, brake pads, oil, operating fluids, spark plugs etc.
- Logbook for recording journeys and displaying the vehicle status, alarm events and maintenance tasks.
- Parking position display and Ping! for help locating the vehicle.
- LIN bus connection for connecting to compatible motogadget products at a later date.
|
L/W/H |
90 x 53 x 30 mm, bolt distance 74 mm |
|
Weight |
Approx. 180 g |
|
Fastener |
2 x M5 stainless steel bolts (installation and ground connection), 1 x M5 screwing contact for battery Plus |
|
Operating voltage |
6 V - 20 V |
|
Operating temperature |
-20°... +80°C |
|
Inputs |
1 x input (+12 V switched) for ignition lock or mo.lock |
|
Outputs |
10 x Outputs (+12V) for: |
Buy Now, Pay Later
Klarna
In order to offer you Klarna’s payment methods, we might in the checkout pass your personal data in the form of contact and order details to Klarna, in order for Klarna to assess whether you qualify for their payment methods and to tailor those payment methods for you. Your personal data transferred is processed in line with Klarna’s own privacy notice. You can read through the Klarna FAQ’s on their site for any additional information.
Afterpay
In order to offer you Afterpay’s payment methods, we might in the checkout pass your personal data in the form of contact and order details to Afterpay, in order for Afterpay to assess whether you qualify for their payment methods and to tailor those payment methods for you. You can read through the Afterpay FAQ’s on their site for any additional information.
Zip Pay
In order to offer you Zip Pay’s payment methods, we might in the checkout pass your personal data in the form of contact and order details to Zip Pay, in order for Zip to assess whether you qualify for their payment methods and to tailor those payment methods for you. You can read through the Zip Pay FAQ’s on their site for any additional information.
Returns Policy
You are entitled to a replacement or refund if any goods purchased fail to be of acceptable quality.
Change of Mind Returns
We understand that sometimes a product may not be exactly what you wanted. Full priced items are available for exchange or return within 30 days of receiving your order.
Exclusions: Change of mind returns are not accepted for:
- Sale, clearance, or promotional items.
- Perishable or hygiene-sensitive goods
- Custom-made or personalized products
Return Shipping Costs
- Faulty Goods: We will pay or reimburse all return shipping charges in accordance with your Australian Consumer Law rights.
- Change of Mind: You are responsible for paying your own shipping costs for returning your item. All return costs must be covered by the sender and are non-refundable.
- Tracking: We highly recommend using a trackable shipping service or purchasing shipping insurance. We cannot guarantee that we will receive your returned item, and the sender bears the risk of the item being lost in transit.
Shipping
Domestic Orders
We utilise Auspost for domestic deliveries. Standard shipping typically takes 2-5 business days for metropolitan areas and 2-10 business days for regional locations. Please note that Auspost is currently experiencing significant delays, which may impact these timeframes.
International Orders
International shipping is handled on a case-by-case basis. Orders are generally dispatched within 1-2 business days, with delivery taking up to 21 days depending on the destination. For an accurate shipping quote, please contact us at parts@deuscustoms.com. Please be advised that all duties and taxes are the responsibility of the purchaser.
Full Policy can be viewed here
Notify Me - Out of Stock
You will be the first to know when this becomes available to shop. Keep an eye on your email.
Opps! There seems to be an error. Please check that your details are entered correctly.
Please fill up the empty form fields to submit.
Motogadget Mo.Unit Bluenull
The title you've selected is out of stock. Leave your email address below and we'll notify you when this becomes available.